PVC Pipe Toothbrush Holders

When we remodeled our hall bathroom last summer I knew we had to come up with a solution for the kids' toothbrushes. We hated the long skinny counter that went all the way across the toilet tank so we made it disappear.  But that meant we were left with a tiny vanity, nearly no counterspace, and kids who weren't really tall enough to reach the shelves we'd installed.

That's when these holders were born.  Hidden away on the inside of the cupboard door they are easily accessible and removable if we need them to be.

Supplies:
1 inch pvc pipe
pvc pipe end caps (one for each holder) 
command hooks
vinyl or stickers
pvc pipe cutter
drill (drill press is even better)

Cut pipe into 4.25 inch sections.

Drill a hole about 1/2 inch from the end, making sure it's on the "back side" where any printing is.

Wash the pipes.  Cut vinyl initials (or use stickers) to label each holder.  I cut mine to be 1 inch tall. Add end caps (they don't need to be glued on, and then you can disassemble them later and wash them out as needed)

Install command hooks on the inside of the cabinet door.  Our vanity is small, so more may fit in your doors if you need them.  Let them set for 1 hour before hanging holders and toothbrushes.

Now hopefully you won't ever have toothbrushes go missing in the garbage cans!

What are some of your organizing tricks you've set up at your house?  Come share them at this month's Point of View link party!